Signs You Are Experiencing Ignition Issues
Even if you have the most recent vehicle on the market, you can still experience a problem with your ignition cylinder. This is just a reality that many motorists have to accept. You hop in the car, turn the key but there is nothing, when you try to start your car. We’ve seen this happen plenty of times at 24 Hour Holly Springs Locksmith.
When something like this happens to you, the first thing you think is that you will have to replace your ignition cylinder or that your key has broken off inside the ignition. If this is what you are experiencing or have experienced it in the past, continue reading. This information may be of value to you. Perhaps the key is stuck in place or you may be able to help someone else who is experiencing this same problem.
Provided the type of car you own, you may be able to handle this problem on your own. There is no one solution that will remedy the problem for everyone because the types of cylinder designs vary based on the type of car you have. In some instances, you may have been advised to simply wiggle the key while wiggling the steering column back and forth. Even though this hasn’t been verified to be effective, we have actually seen this technique work for many of our customer’s. However, this is again dependent on the type of ignition that you have. In some case, applying the wrong pressure in the wrong places could rip them into pieces.
The one thing we want our customers to consider is just how easy it is to snap off the key, causing a problem that is already bad to go from bad to worse. If you are patient enough to wait on one of our professional service technicians, you can avoid this from happening to you. Cars built today are built on an assembly line by robotics and have small parts. This makes it easier to damage the parts of your vehicle when repairs are adjustment is being made.
A problem that you had, which may have been very minor, can quickly turn into a more serious and expensive problem. it is only advisable for someone with the proven technical experience to make any needed changes and repairs. When a friend or family member suggests that you allow them to handle the job to save you money, consider the problems that can be caused if they do not have the technical experience needed to handle the job.
They will not be responsible for anything that happens as a result of their efforts. This will cost you more money in the end. However, if you’re willing to assume responsibility for attempting to make resolve your ignition problem, here are some things you can try:
Parked Position: One of the easiest things for you to do is to make sure your car is in the ‘park’ position. If the gear is still in the ‘drive’ position or any other position other than ‘park’, the safety lever will not enable you to remove the key. Apply pressure to the break and place your car in ‘park’ if isn’t already. This should fix the problem.
Dead Battery: Sometimes we don’t consider the most logical things when we find ourselves in an unpleasant predicament. Some key release mechanisms are electronically powered. This means that if you have a dead battery, they will not work. The way to check to see if you have a dead battery is to turn on one of your cars electronic mechanisms, such as your headlights. If the lights do not come on, you might even consider checking your emergency light. Still no luck, you likely have a dead battery. Charging your battery should resolve your problem.
Steering column: As was mentioned previously, you can sometimes release your key from the ignition by wiggling the steering column back and forth. The key to its success is doing so gently. If you do not, you could easily break the key off in the ignition. This is somewhat risky so you may decide to wait for a professional technician to handle the job. If you have done this before and feel quite confident, go for it. Just remember that this could occur again so even if it works, you should still have the problem checked out by a professional later.
Thermal expansion: You might be able to expand the cylinder slightly by applying the law of thermal expansion. In this case all you need is a hairdryer. Apply heat directly to your cars cylinder and see if it doesn’t help to expand it and release the key. You’ll need to also apply is to the exposed piece of the key in order for it to work effectively. You could also try applying heat to both the key and cylinder to see if it softens the metal making the key easier to remove. Just be aware of the fact that the key can become warped from the heat. Be careful!
These solutions are being offered because we have seen them work. If they hadn’t proved effective for some of the motorists we’ve been in contact with, we would never suggest them. We only suggest that you apply these methods if you are determined to try to resolve the problem on your own, instead of contacting us. Just remember that it is always in your best interest to use the services of a qualified locksmith who has the proven ability to resolve your ignition problem for you. No matter how you slice it, you get what you pay for in terms of services.
When you spend your money to get the services you need from a reputable and reliable locksmiths, such as Holly Springs Locksmith, you’ll receive exactly what you want and need from our professionally trained locksmith technicians. Sometimes it better to be safe than sorry when it comes to your ignition.
At the end of the day, these basic steps may not prove effective to your own individual issue. In such case, it would be time to consider what other options are available. Odds are that the problem can’t wait. The world keeps moving even when that key will not. It’s about the time that the gravity of the situation becomes apparent. Nothing is getting done until that key is freed. At this point a decision must be made whether to pursue another possibly ruinous round of novice tinkering, or to get expert advice from certified locksmiths in Holly Springs, North Carolina.
Luckily, the answer had been in your hands the whole time. Using a smartphone or desktop, it is quite simple to search for a local locksmith, for instance, Holly Springs Locksmith in North Carolina. Professionals can effortlessly pinpoint an issue and solve it accordingly in no time at all. Licensed and qualified locksmiths bring all of the tools that they could need to conduct a mobile key extraction on the spot. It can be a better idea to call them before attempting self-service because many insurance carriers will not cover the cost of auto repair if the damages were caused by the owner themselves. Unfortunately, the tell-tale signs of botched key extraction are evident to auto insurance adjusters with experience in their field.
Being that automobiles are luxuries that many cannot afford to live without, it is of utmost importance to get them back on the road as fast as possible. In this situation, all one needs to do is reach out to an experienced, licensed professional for help.